CRACK SEALING PRODUCTS
M-Series™ Crack Sealer Machine
Benefits:
- Lowest load height in the pavement maintenance industry optimizes operator safety
- Safer road crack sealing machine operation with noise levels up to 40% lower
- Simplify training with easy-to-use automatic controls
- Superior ergonomics with either the new M-Series Lightweight wand or Dripless wand and heated hose
Featuring:
- Wide selection of models with up to a 410-gallon material capacity and several industry-leading options
- Best operating range with Cimline’s no-stress boom swivel
- Environmentally friendly and compliant Tier IV diesel engine that is high performance while maximizing fuel economy
- Easy, ergonomic material loading with a large door and low loading height
- Cimline has excellent flow control using with Cimline’s digital flow control system
- Cimline’s new heated hose has 66% greater heat wrap coverage than the previous hose
- New Lightweight wand with best in class ergonomics for fatigue free all day crack sealing
- Dripless wand delivers the utmost in material control when appearance and minimizing material waste is important.
M-SERIES NO PUMP
Big performance in a small package. Available in 150 or 230 gallon capacity. See the general guidelines below to match your requirements:
- Your work consists mainly of parking lot with some road/ municipal work.
- You typically seal less than 6,000-7,000 Linear feet in a day.
- You prefer using Banders or Pour Pots.
M1-No Pump | M2-No Pump | |
---|---|---|
Material Capacity: | 150 Gallons | 230 Gallons |
Engine: | 6 hp | 6 hp |
Heating Method: | Diesel | Diesel |
Material Heating Rating: | 250,000 BTUs | 2900,000 BTUs |
Material Pump: | Gravity Draw Off | Gravity Draw Off |
Tank Insulation: | Fiberglass, 1.5 Inch Thickness | Fiberglass, 1.5 Inch Thickness |
Heating Method: | Beckett Diesel Fired Burner | Beckett Diesel Fired Burner |
Hydraulic Capacity: | 33 Gallons | 33 Gallons |
Diesel Fuel Capacity: | 33 Gallons | 33 Gallons |
GVWR: | 5515 lbs | 6700 lbs |
GAWR: | 7000 lbs | 7000 lbs |
Axles/ Suspension: | 1×7,000 Torsion Type | 2×3,500 Torsion Type |
Brake Type: | Electric | Electric |
Loading Doors: | Single Curbside | Dual (Both Sides) |
Heat Transfer Oil: | 22 Gallons | 30 Gallons |
Dimensions (l x w x h): | 174” x 84” x 84” | 174” x 84” x 84” |
Shipping Weight: | 3,900 lb. | 4400 lb. |
Due to continuous improvement, specifications are subject to change without notice.
M-SERIES M1 MELTER
Our most popular asphalt crack sealer model. With 150-gallon capacity. Get the performance of the bigger model in a smaller package with single axle that can be towed with a ½ ton pick-up truck. See the general guidelines below to match your requirements:
- Your work consists of some parking lots but mostly road/municipal work.
- Your lane miles supported are less than 50 miles.
- Average daily production of 3-4 lane miles or less.
SPECIFICATIONS
Material Capacity: | 150 Gallons (568 Liters) |
Engine: | 19 hp |
Heating Method: | Diesel |
Material Heating Rating: | 250,000 BTUs |
Material Pump: | 20 gpm (76 lpm) |
GVWR: | 5515 lbs (2501 kg) |
GAWR: | 7000 lbs (3175 kg) |
Axles/ Suspension: | 1 Torsion |
Brake Type: | Electric, Available With Surge Brakes |
Loading Height: | 49 in (1245 mm) |
Loading Doors: | Single Curbside |
Fuel Capacity: | 33 Gallons (125 Liters) |
Hydraulic Capacity: | 33 Gallons (125 Liters) |
Heat Transfer Oil: | 22 Gallons (83 Liters) |
Dimensions (l x w x h): | 170” x 83” x 93” |
Shipping Weight: | 4,200 lb. (1,905 kg) |
Due to continuous improvement, specifications are subject to change without notice.
M-SERIES M2 MELTER
Our most popular asphalt crack sealer model. With 150-gallon capacity. Get the performance of the bigger model in a smaller package with single axle that can be towed with a ½ ton pick-up truck. See the general guidelines below to match your requirements:
- Your work consists of some parking lots but mostly road/municipal work.
- Your lane miles supported are less than 100 miles.
- Average daily production of 5-7 lane miles or more.
SPECIFICATIONS
Material Capacity: | 230 gallons (871 liters) |
Engine: | 19 hp |
Heating Method: | Diesel |
Material Heating Rating: | 290,000 BTUs |
Material Pump: | 20 gpm (76 lpm) |
GVWR: | 6700 lbs (3039 kg) |
GAWR: | 7000 lbs (3175 kg) |
Axles/ Suspension: | 2 torsion |
Brake Type: | Electric, Available With Surge Brakes |
Loading Height: | 50 in (1270 mm) |
Loading Doors: | Dual |
Fuel Capacity: | 33 Gallons (125 Liters) |
Hydraulic Capacity: | 33 Gallons (125 Liters) |
Heat Transfer Oil: | 30 Gallons (114 Liters) |
Dimensions (l x w x h): | 170” x 82” x 91” |
Shipping Weight: | 4,750 lb. (2,155 kg) |
Due to continuous improvement, specifications are subject to change without notice.
M-SERIES M4 MELTER
Largest capacity in industry. With 410-gallon capacity, dual loading doors and tandem axles, the M4 puts the product down! See the general guidelines below to match your requirements:
- Your work consists of heavy county/municipal work.
- Your lane miles supported are more than 100 miles.
- Average daily production of 8 lane miles or more.
- You require dual hose sealing high volume work.
SPECIFICATIONS
Material Capacity: | 410 Gallons (1552 Liters) |
Engine: | 25 hp, 40 Compressor Model |
Heating Method: | Diesel |
Material Heating Rating: | 400,000 BTUs |
Material Pump: | 20 gpm (76 lpm) |
GVWR: | 9520 lbs (4318 kg) |
GAWR: | 10,000 lbs (4536 kg) |
Axles/ Suspension: | 2 Torsion |
Brake Type: | Electric, Available With Surge Brakes |
Loading Height: | 54 in (1372 mm) |
Loading Doors: | Dual |
Fuel Capacity: | 33 Gallons (125 Liters) |
Hydraulic Capacity: | 33 Gallons (125 Liters) |
Heat Transfer Oil: | 40 Gallons (151 Liters) |
Dimensions (l x w x h): | 185” x 90” x 90” |
Shipping Weight: | 6,000 lb. (2,155 kg) |
Due to continuous improvement, specifications are subject to change without notice.
HEATED WAND AND HOSE
High quality, application hose and wands with best in industry ergonomics and ease of use keeps your crew on the job with less fatigue delivering better operational efficiency. The new Cimline™ M-Series™ heated hose and wands are one more example of our dedication to innovation in the pavement maintenance industry. They are designed and manufactured by Cimline in the USA for demanding high use applications in the most challenging environments.