Contact us today: 877.841.0848

POR   ESP   FRA   GER   中文   عربى

Crack Sealing Products

M-Series™ Crack Sealer Machine

M1™ - 150 Gallons of Material Capacity
M2™ - 230 Gallons of Material Capacity
M4™ - 410 Gallons of Material Capacity

Benefits:

  • Lowest load height in the pavement maintencance industry optimizes operator safety
  • Safer road crack sealing machine operation with noise levels up to 40% lower
  • Simplify training with easy-to-use automatic controls
  • Superior ergonomics with either the new M-Series Lightweight wand or Dripless wand and heated hose

Featuring:

  • Wide selection of models with up to a 410-gallon material capacity and several industry-leading options
  • Best operating range with Cimline’s no-stress boom swivel
  • Environmentally friendly and compliant Tier IV diesel engine that is high performance while maximizing fuel economy
  • Easy, ergonomic material loading with a large door and low loading height
  • Cimline has excellent flow control using with Cimline’s digital flow control system
  • Cimline’s new heated hose has 66% greater heat wrap coverage than the previous hose
  • New Lightweight wand with best in class ergonomics for fatigue free all day crack sealing
  • Dripless wand delivers the utmost in material control when appearance and minimizing material waste is important
  • No Pump
  • M1
  • M2
  • M4
  • Heated Wand and Hose
M-Series no pump

Big performance in a small package. Available in 150 or 230 gallon capacity. See the general guidelines below to match your requirements:

• Your work consists mainly of parking lot with some road/ municipal work.
• You typically seal less than 6,000-7,000 Linear feet in a day.
• You prefer using Banders or Pour Pots.

M1 with no pump
Series M1 Melter

Our most popular asphalt crack sealer model. With 150-gallon capacity. Get the performance of the bigger model in a smaller package with single axle that can be towed with a ½ ton pick-up truck. See the general guidelines below to match your requirements:

• Your work consists of some parking lots but mostly road/municipal work.
• Your lane miles supported are less than 50 miles.
• Average daily production of 3-4 lane miles or less.

M1 with pump

Specifications

Material Capacity: 150 Gallons (568 Liters)
Engine: 25 hp, 40 Compressor Model
Heating Method: Diesel
Material Heating Rating: 250,000 BTUs
Material Pump: 20 gpm (76 lpm)
GVWR: 5200 lbs (2359 kg)
GAWR: 7000 lbs (3175 kg)
Axles/ Suspension: 1 Torsion

Brake Type: Electric, Available With Surge Brakes
Loading Height: 50 in (1270 mm)
Loading Doors: Single Curbside
Fuel Capacity: 33 Gallons (125 Liters)
Hydraulic Capacity: 33 Gallons (125 Liters)
Heat Transfer Oil: 22 Gallons (83 Liters)
Dimensions (l x w x h):
152” x 82” x 93”
Shipping Weight : 4,200 lb.(1,905 kg)

M-Series M2 Melter

Workhorse of the pavement maintenance. With 230-gallon capacity, dual loading doors and tandem axles, the M2 gets the job done. See the general guidelines below to match your requirements:

• Your work consists of some parking lots but mostly road/municipal work.
• Your lane miles supported are less than 100 miles.
• Average daily production of 5-7 lane miles or more.

M2 with pump

Specifications

Material Capacity: 230 gallons (871 liters)
Engine: 25 hp, 40 Compressor Model
Heating Method: Diesel
Material Heating Rating: 290,000 BTUs
Material Pump: 20 gpm (76 lpm)
GVWR: 6840 lbs (3103 kg)
GAWR: 7000 lbs (3175 kg)
Axles/ Suspension: 2 torsion

Brake Type: Electric, Available With Surge Brakes
Loading Height: 50 in (1270 mm)
Loading Doors: Dual
Fuel Capacity: 33 Gallons (125 Liters)
Hydraulic Capacity: 33 Gallons (125 Liters)
Heat Transfer Oil: 30 Gallons (114 Liters)
Dimensions (l x w x h): 170” x 79” x 92”
Shipping Weight : 4,750 lb.(2,155 kg)

M4 Melter

Largest capacity in industry. With 410-gallon capacity, dual loading doors and tandem axles, the M4 puts the product down! See the general guidelines below to match your requirements:

• Your work consists of heavy county/municipal work.
• Your lane miles supported are more than 100 miles.
• Average daily production of 8 lane miles or more.
• You require dual hose sealing high volume work.

M4

Specifications

Material Capacity: 410 Gallons (1552 Liters)
Engine: 25 hp, 40 Compressor Model
Heating Method: Diesel
Material Heating Rating: 400,000 BTUs
Material Pump: 20 gpm (76 lpm)
GVWR: 9520 lbs (4318 kg)
GAWR: 10,000 lbs (4536 kg)
Axles/ SusSpension: 2 Torsion

Brake Type: Electric, Available With Surge Brakes
Loading Height: 54 in (1372 mm)
Loading Doors: Dual
Fuel Capacity: 33 Gallons (125 Liters)
Hydraulic Capacity: 33 Gallons (125 Liters)
Heat Transfer Oil: 40 Gallons (151 Liters)
Dimensions (l x w x h): 185” x 90” x 90”
Shipping Weight : 6,000 lb.(2,155 kg)

Heated Wand and Hose

Cimline’s Innovations In Sealant Material Application:
High quality, application hose and wands with best in industry ergonomics and ease of use keeps your crew on the job with less fatigue delivering better operational efficiency. The new Cimline™ M-Series™ heated hose and wands are one more example of our dedication to innovation in the pavement maintenance industry. They are designed and manufactured by Cimline in the USA for demanding high use applications in the most challenging environments.

Cimline Heated Wand